Auto bearings and

Special Products

Ropesa has a catalogue that covers a wide range of industrial necessities. Discover it.

Old News

Read other news

octubre 2010 setiembre 2010 agosto 2010

Last News

Last month news

noviembre 2010

By Categories

Read news by category

Eventos Productos Ofertas Revista Soluciones Revista Evolution

News & Offers

SKF railway axlebox grease LGRT 2

LGRT 2 is specially developed for lubrication of axlebox bearings
of passenger coaches, freight wagons, locomotives, multiple units
and mass transit vehicles with speeds up to 200 km/h. It fulfills the
European specification EN 12081 (Railway applications -
Axleboxes - Lubricating greases) for speed class “a”.
 
Formulated with a highly refined base oil and lithium soap thickener
High resistance against oxidation, wear and corrosion due to specially selected additives
Excellent performance due to high mechanical stability
Good water resistance

Does not contain solid ingredients

 

LGRT 2
 
 
http://www.mapro.skf.com/pub/pds/LGRT2_datasheet_e.pdf

 

Written on 2007-11-20 10:38:00 -- Category: Productos

Advanced thermal imager TMTI 2

Comprehensive high resolution thermal imaging package
 

The advanced thermal imager TMTI 2 is a user-friendly thermal imager, producing high quality images from invisible infrared radiation. The high resolution (160x120 /19 200 pixels) images are displayed on a large backlit 3½” screen, for ease of viewing. Powerful PC and report-writing software is supplied as standard, which help enable the user to perform comprehensive data analysis and enhancement of the images.

Advanced temperature measurement features are built-in to the TMTI 2 such as, automatic hot spot and cold spot finder, Maximum/Minimum temperature view of an area and temperature difference display of two user defined spots. Suitable for industrial environments, the TMTI 2 is supplied in a heavy duty case with software, rechargeable battery, battery charger, and a SD memory card for image storage.
 

Written on 2007-11-05 11:47:00 -- Category: Productos

SKF Combi kit TMMK 10-35

Compact ergonomic design and light weight helps make the TMTI 2 suitable for use in most industrial applications
Easy to navigate menu makes the TMTI 2 a user-friendly instrument and helps facilitate ease of use
Non-contact measurement technique enabling measurements to be made safely on running equipment
Wide temperature measurement range from –10 °C to 250 °C is ideal for Predicative Maintenance applications
User selectable emissivity correction from 0,2 to 1,0 with reflective ambient temperature correction, helps ensure that the TMTI 2 is suitable for almost any application
Convenient temperature measurement in K, °C and °F eliminates the necessity to convert temperature reading
Laser pointer pinpoints the area of interest. Easy to associate the hot spot on the screen with the target in the field
Multi-purpose kit for quick and easy mounting and dismounting
 
The SKF Combi kit TMMK 10-35 is designed for quick and precise mounting of bearings with bore diameters from 10 to 35 mm and for dismounting deep groove ball bearings from shafts, housings and blind housings from the same range.

For mounting, a multipurpose fitting tool is included which is suitable for mounting bearings as well as bushings, seal rings, belt pulleys and other similar products.

For dismounting of deep groove ball bearings from blind housings and shafts, the SKF Combi kit contains a unique three armed puller. When dismounting deep groove ball bearings from housings, a combination of this puller, sliding hammer and support rings enables easy removal of bearings
 
All parts are clearly arranged in the case for easy selection and identification
The correct combination of impact ring and sleeve helps ensure that mounting forces are not transmitted via the rolling elements of the bearing, minimizing damage to bearing due to incorrect mounting
The impact rings are made of high-impact modified polyamide. The impact sleeves are made of glass fibre-reinforced, high-impact modified polyamide, which is super-tough, strong and lightweight
The dead-blow hammer has nylon faces and is steel-shot loaded for maximum impact. The handle, with comfortable rubber-grip for good handling, absorbs shock and vibration
A complete kit of different sizes puller arms and spindles facilitates the dismounting of up to 49 different SKF deep groove ball bearings
The claws are especially designed to facilitate a precise fit in the bearing's raceways, providing good grip and allowing the application of higher dismounting forces
The designation is laser-engraved on the arms allowing easy identification and selection
The springs are colour-coded allowing easy selection and matching
Elastic locking ring results in easy connection of puller arms to spindle
Heavy sliding weight of the sliding hammer generates a high dismounting force
SKF Combi Kit TMMK 10-35
 

 

 

Written on 2007-10-18 10:19:00 -- Category: Productos

Battery driven grease gun LAGG 400B

Quick and easy grease filling
 
The SKF Battery driven grease gun LAGG 400B is a high quality grease gun suitable for lubricating bearings, machines, vehicles and other applications. Ergonomically designed and user friendly, the grease gun can be used with standard SKF grease cartridges (420 ml) or filled with approximately 500 cm3 (17 US.fl.oz) of loose grease.
 
Compared to hand operated grease guns, a 420 ml cartridge can be emptied in approx 10 minutes with minimum effort, resulting in significant cost and time saving
Electrical operation and the ergonomic design of hand grip helps reduce operator fatigue compared to manual methods
Easy-to-use one hand operation makes the grease gun user friendly
Supplied with various electrical plugs and two power supply versions (230 and 110 V charger) makes it operational worldwide
Battery operation allows use in almost all environments without use of a mains supply
Long battery life of 1 000 charging cycles helps reduce product life costs
Refillable: grease filling nipple and de-airing valve allow filling up by filler or grease pump
Safety valve setting set to 40 MPa (5 800 psi) helps increase operator safety
Supplied with M10x1 nozzle, interchangeable with SKF hoses, SKF grease meter LAGM 1000E and other accessories

 

LAGG 400 B

 

 

http://www.mapro.skf.com/pub/pds/lagg400b_datasheet_e.pdf  

Written on 2007-10-01 14:48:00 -- Category: Productos
ropesa company industrial services auto bearing catalog map news contact

ROPESA: Rodamientos y Productos Industriales SA. B-A58066697. Polígono Can Canyet, Nave 7 D. 08754 El Papiol (BCN).
Design & Web Developing by TOTBITS.